Wohner products c14 head

Motus®C14
Connect Plus

In the premium version, the MOTUS®C14 is equipped with a display, which enables the programming of all functions and data retrieval. The programming can be done via the integrated USB interface of ServiceTool.

The communication interface enables connection to intelligent sensors and actuators in an automation system or bus systems through a gateway.

Motus®C14 Connect Plus

display

In the premium version, the MOTUS®C14 is equipped with a display, which enables the programming of all functions and data retrieval of the MOTUS®C14. The programming can be done via the integrated USB interface of ServiceTool.

The communication interface enables connection to intelligent sensors and actuators in an automation system or bus systems through a gateway.

Ui clockwise
Ui counter clockwise
Ui emergency
Ui heat warning
Ui under voltage
Ui asymmetry
Ui bypass
  • Ui clockwise
  • Ui counter clockwise
  • Ui emergency
  • Ui heat warning
  • Ui under voltage
  • Ui asymmetry
  • Ui bypass
  • Operating message

    • motor on
    • motor in direct rotation
    • tripping characteristic "Class 10A"
    • rated current "2,3 A"
    • motor load "70 %"
  • Operating message

    • motor on – soft start
    • motor in reverse rotation
    • tripping characteristic "Class 10A"
    • rated current "2.3 A"
    • motor load "70 %"
  • Warning message "STOP”

    • the warning message indicates that there is no safety release and that the motor cannot be switched on
    • if there is no safety release during operation, the device switches off the motor
  • Warning and fault message "overtemperature"

    • checking the permitted temperature at internal components by the self-diagnostics
    • warning message "temperature too high" with (yellow device lighting)
    • fault message "device switches off" with (red device lighting)
    • acknowledgement of the fault message via central control or directly at the main switch of the device
  • Warning and fault message "undervoltage"

    • checking the permitted supply voltage by the system diagnostics
    • warning message "supply voltage too low" (yellow device lighting)
    • fault message "device switches off" (red device lighting)
    • acknowledgement of the fault message either via central control or directly at the main switch of the device
  • Warning and fault message "asymmetry"

    • checking the symmetry of the currents by system diagnostics
    • warning message "asymmetry supply" or "asymmetry load" (yellow device lighting)
    • fault message "device switches off" (red device lighting)
    • acknowledgement of the fault message via central control or directly on the main switch of the device
  • Fault message "short circuit"

    • short circuit in motor or supply cable
    • fault message "device switches off" (red device lighting)
    • solution assistant indicates troubleshooting after pressing main button
    • acknowledgement of the fault message via central control or directly at the main switch of the device

Motus®C14 Connect Plus

parametrisation/control

  • current setting
  • characteristic setting for all motor classes
  • 8 adjustable tripping classes
    (2E, 3E, 5 ,10 ,10A , 20, 30, 40E)
  • threshold value settings for current and voltage
  • fixed threshold values for temperature
  • variable fan speed for optimal temperature management
  • access to internal real-time data: current, voltage, power
  • direct start
  • reversing start
  • soft start optional
  • switching resistive loads
  • galvanic break
Parametrization mobile
Parametrization
  • Parametrization web
    parameterisation and control via web application
  • Parametrization usb
    parameterisation via USB interface on the device
  • Parametrization device
    direct parameterisation on the device with display and control buttons

Motus®C14 Connect Plus

ServiceTool

Commissioning – Parameterisation – Data logging

The ServiceTool of Wöhner provides the following functionalities:

  • commissioning and setting parameters
  • manual control of the drive
  • import and export of data

System – Software

  • connection of the devices via a USB-C interface
  • for safety reasons software updates of the MOTUS®C14 can only be done via the USB-C interface
  • download available for Windows 10 or macOS
Service tool schema

Motus®C14 Connect Plus

connections

All connections of the MOTUS®C14 are pluggable and thus enable quick wiring of the devices.

  • Top view
  • Bottom view
  • Back view
  • Conect Plus Stecker 01 top en

    The control plug is located on the upper section of the MOTUS®C14. It can be used either for conventional or
    IO-Link wiring.

    With IO-Link wiring, the connection is made via 3 wires: supply voltage 24 V DC (+), GND and C/Q data.

  • MOTUS®C14 Connect load plug

    The lower section of the MOTUS®C14 is used to wire the T1, T2 and T3 load plug. The cable is clamped to the plug using a screw clamp connection.

    The USB interface is also located on this side. This interface enables via the ServiceTool the parameterisation and the data retrieval of the device.

  • Conect Plus Stecker 03 side en

    The MOTUS®C14 uses CrossLink®Technology and can be plugged directly onto the CrossBoard®. With an adapter, the device can be mounted on the systems 30Compact and 60Classic or in the system Panel on the DIN mounting rail. With all types, the contacts of the CrossLink® adapter or the CrossBoard® remain touch-safe while removing the electronic unit.

    The mechanical and electrical connection (up to 500 V) is done without using tools when the device is snapped onto the CrossLink® interface during installation. The integrated contact protection prevents the contacts from being damaged during transport, mounting and dismounting.

  • Conect Plus Stecker 01 top en
  • MOTUS®C14 Connect load plug
  • Conect Plus Stecker 03 side en

Motus®C14 Connect Plus

Technical details

The MOTUS®C14 switches faster than circuit breakers and faster than fuses in case of a fault.

1010
microseconds
C14-Technology
extremely fast switch-off time in case of fault

20002000
microseconds
Fuse-Link
switch-off time in case of fault
50005000
microseconds
Circuit breaker
switch-off time in case of fault
rated operating voltage 130 - 500 V (IEC)
130 - 480 V (UL)
rated operating current
for motors
2.6 A / 1.1 kW
6.6 A / 3.0 kW
12.0 A / 5.5 kW (on request)
rated operating current
for resistive loads
2.6 A / 1,8 kW
6.6 A / 4.5 kW
12.0 A / 8.3 kW (on request)
short-circuit resistance 100 kA, coordination type 2
control voltage 24 V DC
electrical switching cycles > 30 million
connection plugs control circuit: 0.2 - 1.5 mm² (solid, flexible) / AWG 24 - 16
load circuit: 0.2 - 2.5 mm² (solid, flexible) / AWG 24 - 14
dimensions
(w x h x d)
CrossBoard®: 22.5 x 160 x 130 mm
30Compact: 22.5 x 160 x 130 mm + 14 mm adapter
60Classic: 22.5 x 200 x 130 mm + 14 mm adapter
approval IEC IEC / EN 60947-4-2 / -3
approvel UL UL listed (C-UL-US)
article overview MOTUS®C14 Connect Plus - CrossBoard®
36258: electronic unit 0.1 - 2.6 A / switch for resistive loads 0.1 - 2.6 A
36262: electronic unit 0.1 - 6.6 A / switch for resistive loads 0.1 - 6.6 A
36266: electronic unit 0.1 - 12.0 A / switch for resistive loads 0.1 - 12.0 A*

MOTUS®C14 Connect Plus - 30Compact
36256: reversing starter 0.1 - 2.6 A / switch for resistive loads 0.1 - 2.6 A
36260: reversing starter 0.1 - 6.6 A / switch for resistive loads 0.1 - 6.6 A
36264: reversing starter 0.1 - 12.0 A / switch for resistive loads 0.1 - 12.0 A*

MOTUS®C14 Connect Plus - 60Classic
36257: reversing starter 0.1 - 2.6 A / switch for resistive loads 0.1 - 2.6 A
36261: reversing starter 0.1 - 6.6 A / switch for resistive loads 0.1 - 6.6 A
36265: reversing starter 0.1 - 12.0 A / switch for resistive loads 0.1 - 12.0 A*

MOTUS®C14 Connect Plus - Panel
36255: reversing starter 0.1 - 2.6 A / switch for resistive loads 0.1 - 2.6 A
36259: reversing starter 0.1 - 6.6 A / switch for resistive loads 0.1 - 6.6 A
36263: reversing starter 0.1 - 12.0 A / switch for resistive loads 0.1 - 12.0 A*

* article on request

MOTUS®C14 CONNECT PLUS

MAXIMUM INRUSH CURRENTS

Bar chart shows the maximum inrush currents in cold state for a single start

Motus c14 connect anlaufstroeme en

MOTUS®C14 CONNECT PLUS

CURRENT CHARACTERISTICS

Permissible repeatable overcurrent factor to rated operating current (AC-53a)

Motus c14 connect stromkennlinien en
ServiceTool